Exterior Lighting Installation in Virginia Beach, VA

A Master Electrician installs the fixtures and wiring, not a handyman.

We use wet-rated, corrosion-resistant fixtures built for rain, humidity, and salt air.

Floodlights, security lighting, and motion or dusk-to-dawn controls done right.

Clean soffit downlighting, entry, porch, and wall lighting for curb appeal.

We handle high, hard-to-reach house-mounted fixtures safely.

Long-life LED that runs cool and cuts energy use.

Fixtures that survive the coast

Standard exterior fixtures corrode and fail quickly in salt air, so fixture choice matters more here than inland. We install wet-rated, corrosion-resistant fixtures and seal the connections against moisture, so your lighting keeps working and looking good instead of rusting out in a season or two.

Security and safety, done right

Good exterior lighting lights the paths, entries, and dark corners where safety and security matter, and the controls make it effortless. We place floodlights and security fixtures where they actually help and set up motion or dusk-to-dawn control, so the right areas light up automatically when they should.

The wiring behind it is safe

Exterior lighting includes outdoor wiring, weatherproof connections, and often new circuits, all of which must be correct to be safe in a wet environment. We handle the wiring and controls to code, so your lighting is as sound behind the wall as it is bright in front of it.

Fixtures

House-mounted lighting for security and curb appeal.

• Wall-mounted and coach light installation
• Floodlight and security-light installation
• Soffit and eave downlighting
• Entry, porch, and doorway lighting
• Deck, patio, and covered-porch lighting
• Garage and carport lighting

Controls and wiring

The controls and circuits that make it work.

• Motion-sensor and dusk-to-dawn controls
• Photocell and timer setup
• New exterior lighting circuits and switching
• Weatherproof outdoor wiring and connections
• Replacing failed or corroded exterior fixtures

Fixture swaps versus new lighting

Replacing existing exterior fixtures is straightforward and affordable, while adding new lighting that needs fresh circuits and wiring is a larger project. Doing several fixtures in one visit is the most efficient way to price them.

What moves the price

The number and type of fixtures, whether new circuits are needed, the controls you want, and how hard the locations are to reach all affect the number. We tailor the quote to your home rather than a flat rate.

This homeowner recommended Wayne for any electrical project, describing how he installed a floodlight in a hard-to-reach spot on the second floor of the house, was on time, offered a fair price, and did clean work. Exactly the kind of hard-to-reach exterior fixture we handle safely.

Real Customer Example | From a verified Google review (bradjohn44, 2023)

Kevin had Castles Electrical add lights under his deck as part of an outdoor project and called the team extremely responsive and economical, and said their work was excellent, adding that he would only use them going forward. Clean, well-done exterior lighting that adds real usability outdoors.

Real Customer Example | From a verified Google review (Kevin L., 2023)

A theme in our five-star reviews is that we show up on time, work cleanly, and price fairly for outdoor jobs as much as indoor ones. That reliability is what you want on exterior lighting that lives out in the weather, and you can read the full reviews in the live Google feed below.

Real Customer Example | What homeowners tell us about outdoor work

Salt air corrodes standard fixtures

Our coastal salt air is hard on outdoor fixtures, corroding finishes and connections that were not made for it, so a standard fixture can rust out in a couple of seasons. We install wet-rated, corrosion-resistant fixtures and seal the connections to ensure your exterior lighting holds up in a marine environment.

Outdoor living calls for good lighting

The coastal lifestyle here means decks, patios, and covered porches get real use after dark, and lighting makes those spaces usable and safe at night. We light these outdoor-living areas with fixtures rated for the exposure, so you can actually enjoy them in the evening.

Security lighting for the neighborhood

Well-placed floodlights and motion lighting deter problems and make a home feel safe, which many homeowners here want around entries, driveways, and dark corners. We place security lighting where it helps and set the controls so it comes on automatically when it should.

Storms demand secure mounting

This region takes strong storms, and an exterior fixture that is not mounted and sealed well becomes a leak or a loss in high wind. We mount and seal fixtures to hold up through the weather here, so a storm does not turn your lighting into a problem.

Hard-to-reach spots on coastal homes

Many homes here have tall gables, second-story walls, and high soffits where a fixture is genuinely hard to reach, which is exactly where do-it-yourself installs go wrong. We handle these house-mounted, hard-to-reach fixtures safely so the lighting gets done right without the risk.

Wet-rated, corrosion-resistant selection

Outdoor fixtures must be rated for the exposure, wet-location where they take direct weather, and built to resist corrosion in salt air. We select fixtures for the specific location and finish them and their connections to withstand coastal conditions, which is the difference between lighting that lasts and lighting that rusts.

Motion, dusk-to-dawn, and photocell controls

The controls are what make exterior lighting effortless, and each has its place: motion sensors for security and efficiency, dusk-to-dawn, and photocells for lighting that runs all night on its own. We install and tune the right control for each fixture so the lighting behaves the way you actually want.

Soffit and downlighting done cleanly

Soffit and eave downlighting gives a home a clean, high-end wash of light, but it takes careful placement and wiring through the eaves to look right. We plan and install soffit lighting so the effect is even and the wiring stays hidden, which is a craft that a quick surface-mount job cannot match.

Weatherproof wiring and connections

Outdoor wiring lives in the wet, so every connection needs the right weatherproof method, box, and seal; otherwise, moisture can get in and cause failures or hazards. We run and seal exterior wiring correctly, so the part you cannot see is as sound as the fixtures you can.

Safe work in hard-to-reach places

House-mounted fixtures on high walls, gables, and second stories are common here and are where installs get risky. We handle these ladder-accessible, hard-to-reach fixtures safely and correctly, so a difficult location does not mean a compromised or dangerous install.